Product name: High concentration and low foam degreasing refining penetrant
Product Description:
In the current metal degreasing industry, when formulating degreasing agents, in order to increase the degreasing speed or clean heavy oil stains, penetrants are usually selected to enhance the penetration performance and oil stain stripping performance.
However, there is no special penetrant for degreaser on the market, and most manufacturers choose penetrants from the textile and leather industry (such as: JFC, fast T, AEP, OEP, HA, RP, OE, SF, isomerized alcohol, etc.) "Oil penetrant" has little effect and has a strong odor. The reasons for the unsatisfactory effect of "penetrating agent in textile and leather industry" are as follows:
- In the textile fabric treatment solution, it is necessary to penetrate at the three-phase interface of "water-liquid-air-fabric", and the penetration of traditional textile industry ,the wetting and penetration of the agent at the three-phase interface is effective.
- However, in the degreasing agent, it is necessary to penetrate the three-phase interface of "water, oil, and metal", and the phase interface has changed. If the "penetrant in the textile and leather industry" is added to the degreasing agent, the effect will definitely not be ideal. If you want to greatly improve the penetration and peeling effect of oil stains, you must choose a penetrant that quickly wets at the "water-liquid-oil-soil-metal three-phase interface".
- After a large number of experimental verifications: "long carbon chain double isomerization aliphatic glycol polyoxyethylene aldehyde" can quickly penetrate at the "water-liquid-oil-metal three-phase interface". In the process of oil removal, large pieces of oil can be penetrated to make the oil on the metal surface polycondensate into "small spherical oil droplets" or "linear oil flow" or "small flake fluffy oil swirl", which can be separated from the metal surface, thereby realizing The purpose of quick oil removal.
Product Feature:
. The cotton cloth has strong degreasing ability.
. Low foam, continuous foam suppression, to eliminate the phenomenon of cloth blocking caused by excessive foam.
. Good gross effect (if no alkali is added, the dosage is 1g/l after high temperature treatment, and the cloth surface can also achieve instant absorption)
. Easy to use, cold water can be diluted.
Product Application:
. Application field: Knitted cotton.
. Equipment used: small oxygen pump, 1000ml graduated cylinder
. Test method: Add 2g/l of auxiliary agent, pour 200ml into a 1000ml measuring cylinder, put in aeration pump pumice, bubble and time, stop bubbling for 30 seconds and record the foam height, stop the time for foam elimination and record the defoaming time.
Product Specification:
|
Exterior |
Transparent liquid |
|
ionic |
Nonionic |
|
pH |
6-7 |
|
Brix/drying solids |
54/57 |
Please pay attention to the following:
it should be sealed and stored in a cool, dry and ventilated place. The storage period is 6 months. This product is an environmentally friendly product, non-dangerous, and can be transported safely.
Product Package and storage:
. 125KGS plastic bucket lined with plastic bags.
. Store in a cool, dry and ventilated place. The storage period is 6 months.
